 |
|
The radioprogrammer Plus for sun-blinds and rolling shutters
allows to command directly by radio an asyncronous tubular motor to 230Vac
(max 400W).
To simplify the installation, the form of the radioprogrammer has been
studied for being contained inside or above the motor, inside the blinds
or shutters cabinet.
The activation can be done with the transmitters Erone433, mini Erone
433 and with the special wall transmitter Erone 433TM. The command can
be single, multiple or centralized. The security Rolling Code system guarantees
the maximum safety and the total inviolability of the communication between
transmitter and receiver.
Operating modes:
- Sequential
Using the same button (it is necessary to be in sight of the device):
1 impulse opens;
1 impulse stops;
1 impulse closes;
the stop can also occur at the end of a programmable timing.
- With separate commands
A different button is used for every function opening, stop and
closing.
Type of command:
- Single command
A transmitter commands a single tubular motor.
- Multiple command
A transmitter can singly command up to 4 radioprogrammers in sequential
mode or two radioprogrammers of which one in sequential and the other
in separate commands.
- Centralized command or of group
A transmitter contemporarily commands more receivers all in closing
or all in opening: for that it is necessary to set the operating mode
into separate commands; in this way it is possible the centralized closing
or opening.
Radioprogrammer Plus for sun blinds and rolling shutters
|
Series
|
F
(MHz)
|
Coding
type
|
Comb.
|
Mem.
|
Code
|
| Erone433 |
433.92
|
Rolling
code Keeloq® |
264 |
85 |
SEL2641-R433-RM
|
Technical characteristics
| Receiver
type: |
Single
conversion superheterodine con RF preamplifier LN |
| Demodulation: |
AM/ASK |
| Voltage
power supply: |
230
Vac, 50 Hz |
| Max
Power: |
400W |
| Input: |
Ingresso
separato per Anemometer |
| Weight: |
105g |
| Housing
protection grade: |
IP54 |
| Operating
temperature: |
-
20°C / +70°C |
| Dimensions: |
25x41x154mm |
Accessories
Guarantee
The guarantee period of all Erone products is 24 months beginning from the
manufacture date. During this period, if the product does not work correctly
due to a defective component, the product will be repaired or substituted
at the discretion of the producer. The guarantee does not cover the plastic
container integrity. After-sale service is supplied at the producer's factory.
Homologation
and CE Certification
All
the Erone products are CE certified according to the European directives
89/336/EEC, 73/23/CEE and 99/05/CE.
|
